- Ultrapure PFA wetted surfaces for optimal compatibility with aggressive chemicals
- Specialty fittings eliminate wetted O-rings to enhance cleanliness and reduce potential for leaks
- Fast, powerful temperature response from low-mass heating element with low watt density
- 160°C maximum temperature
- Up to 120°C at 60 psi
- 1-10 kW models available
- Liquid level sensor
- Ground wire options
- Over-temperature thermocouple
- Process thermocouple
| Heater | Patented coil |
| Wetted Surfaces | PTFE/PFA |
| Sizes | 1 kW to 30 kW (dependent on customer voltage) |
| Voltages | 200 VAC to 480 VAC, 1-ph and 3-ph (dependent on wattage) |
| Temperature | Ambient to 95º C (203º F) |
| Temperature Accuracy | ± 0.1º C |
| Flow | 0.5 GPM (1.9 LPM) to 32 GPM (122 LPM) (dependent on model) |
| Pressure | 60 PSIG @ 95º C |
Ultrapure Fluid Sterilization & Cleaning Systems
Purity is an essential component in a variety of manufacturing processes across industries.
Maintaining a sterile environment guarantees that customers achieve quality product outcomes and enhanced yields.
Sterilization and cleaning can be accomplished by using steam, deionized water, ultraviolet light or filtration.
we are built with PVDF/PFA plastic flow paths to ensure that the highest standards of purity can be obtained.
For large quantities of fluids, we has designed a DI water heating system that provides higher purity than any other product on the market.
High-quality electro-polished stainless steel, and a patented design that incorporates sanitary fittings and high-performance heating modules, enable sterilization and cleaning for a variety of markets such as food & beverage manufacturing, medical devices, biopharmaceutical, semiconductor and many others.
Industries
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
Applications
Ultra-High-Purity Heating
Designed with Ultra-High-Purity processes in mind, Surplus delivers clean-room assembled, reliable heating and power solutions to fit specific needs.
Products For Ultra-High-Purity Heating |
| Inline Heater 
| PFA Inline Heater 
| Inline Chemical Heater 
|
FAQ
What To Do If Your Shipment Is Damaged:
Leave the items, packing material, and carton “as is”. Notify your carrier’s local office and ask for immediate inspection of the carton and its content. After inspection has been made by the carrier, and you have received acknowledgment in writing as to the damage, please contact our Customer Service Department at +86-13560811662 for return authorization. If writing for return authorization, please indicate your purchase order number. We will repair or replace the merchandise depending on the extent of the damage. It is your responsibility to follow the above instructions, or the carrier will not honor any claims for damage. If there are any shortages or questions regarding this shipment, please notify us within ten (10) days.
Safety Precautions
Every effort has been made to insure that this unit will run with a minimum of user input or maintenance. However, there are still precautions to be taken whenever operating, performing maintenance, or servicing this unit. This unit makes use of heating elements and electrical components, both of which pose inherent burn, fire, and electrical shock hazards. These hazards can result in injury to personnel, plant, and/or process. Please note the following to aid in the operation of your unit and to decrease risk of the above mentioned hazards.
Precautions
• Carefully and completely read this and all accompanying literature to verify that you understand the functionality and features of this system. Please become familiar with the integral safeties and controls within this system, and know their function.
• Always disconnect electrical power prior to installing, servicing or replacing electric heating elements and/or assemblies.
• Electrical termination enclosures should be selected to match the application’s environment and be able to withstand worst-case failures, especially in hazardous locations
